Results 1 to 10 of 10
  1. #1
    Seedling Egzoset's Avatar

    Join Date
    Jun 2012
    Location
    Qc, Canada
    Posts
    146
    Thumbs Up/Down
    Received: 3/0
    Given: 7/0
    Rep Power
    9

    0 Not allowed! Not allowed!

    Lightbulb DynaVap IH-drive fix

    Salutations,

    Tired of conductive heat solutions??

    Think KISS design and look again:

    Click image for larger version. 

Name:	Egzoset's LAVAGen2 IH-Driven Heat Convertor concept (2019-Mar-28) [700x480] .PNG 
Views:	12 
Size:	377.4 KB 
ID:	60897

    [ https:// i.postimg.cc/bwXqk20c/Egzoset-s-idea-of-some-IH-Driven-Heat-Convertor-2019-Mar-28-7.png ]

    [ http:// oi63.tinypic.com/14y4uma.jpg ]


    Just imagine a spiral trench carved on the outer surface of that metal tube, with a CCD Screen on the far left side, in the middle of a path to the SiC puck...

    It may work with the Loto labs Evoke/Lux too and even better with a Dr. Dabber Switch i predict.

    Good day, have fun!!
    http://www.jango.com/profiles/44436821

  2. #2
    Seedling Egzoset's Avatar

    Join Date
    Jun 2012
    Location
    Qc, Canada
    Posts
    146
    Thumbs Up/Down
    Received: 3/0
    Given: 7/0
    Rep Power
    9

    0 Not allowed! Not allowed!

    Lightbulb

    UPDATE:




    So... It's about time i think of completing my modest contribution finally!


    Apparently some 3rd-party ready-made commercially-available IH-drivers have been found to share a same common symptom - and still do: unstable gates in power stages can cause forbiden conditions as a "shot-thru" lockup, which occurs because "ringing" is allowed to take place by design, willing to circumvent the problem using a temporary fix (eventually turned permanent...) while leaving its cause in place for some obscure motives still eluding me at the moment. It may seem acceptable for those ready to trade reliability in exchange for portability but i find that's a far stretch in A.C. powered units nonetheless. As a matter of fact it's not recent at all, a couple hours of Google Search will confirm this was even a popular topic before 2010, when alternatives to the over-simplified Mazilli/Royer oscillator started to appear, by the way. Consequently, although it's fine to get an exploratory phase there are crucial lessons to retain from those who walked the path and made such precious legacy openly accessible to posterity, for example:





    Please pay special attention to the dates!


    So, the technology has evolved and the guys wanting to melt metal tried their best to tweek it to perfection, while others got obviously stalled making circles around the Maxilli modules ever since - for years literally. Eventually the cannabis vaporists should find solid IH-driver solutions on the market by now, instead we have legacies awaiting to be re-discovered despite general indifference! One of those old posts causing me to day-dream in particular:



    [ http:// inductionheatertutorial.com/inductionheater/induction7.html ]
    Induction Heater Tutorial - 10kw and 3kw

    « Now, we are ready to talk about the phase locked loop chip - the HEF4046. After this discussion, we will have enough information to understand the workings of the inverter and how it maintains a lock on the resonance. »



    Apparently one magic "KeyWord" is PLL:



    [ https:// www.google.com/search?q=PLL+ZVS+%22Quasi-Resonant%22+%22Induction+Heat%22&tbm=isch ]
    Google Images: PLL ZVS "Quasi-Resonant" "Induction Heat"


    Then boom! Something viable to chew on at last (this is my edited version of it...):





    Actually i think it also inspired others:



    [ https:// highvoltageforum.net/index.php?topic=116.msg724#msg724 ]
    Adventures in induction heating (2017-Aug-24)



    It might feel excessive to go into further details except to argue that similar effort to address a decade-old problem comes with rewards denied to paying customers who didn't get all the explanations it seems...

    In any case if PLL + ZVS is the remedy then i'll have to use it ultimately, the sooner the better i shall add!


    ...


    Good day, have fun!!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Resonant Frequency vs Temperature by Irshad Khan (Y2K) [520x340] .PNG 
Views:	35 
Size:	84.5 KB 
ID:	61009   Click image for larger version. 

Name:	MOSFET Induction Heater (p1) - Commented by Egzoset - Jonathan Kraidin (2010-Jan-1) [800x600] .PNG 
Views:	34 
Size:	170.6 KB 
ID:	61010  
    Last edited by Egzoset; 07-08-2020 at 07:28 AM. Reason: On-Line Parser destroyed text format...
    http://www.jango.com/profiles/44436821

  3. #3
    Seedling Egzoset's Avatar

    Join Date
    Jun 2012
    Location
    Qc, Canada
    Posts
    146
    Thumbs Up/Down
    Received: 3/0
    Given: 7/0
    Rep Power
    9

    0 Not allowed! Not allowed!

    Lightbulb

    More update:




    Using some "magic" keywords i eventually obtained from Google that it shows me something which might at least partly fit the "mystery box" in my previous post:




    According to its corresponding schematic and the next one below it's quite possible and apparently even convenient to take full advantage of a "555" type of timer which is integrated right onto the IR2153/IRS2153 chip itself:



    [ https:// www.elettroamici.org/en/uso-ed-abuso-del-ir2153/ ]
    Use and misuse of the IR2153 for feeders up to 1.5KW


    A few tricks may actually pave the way to some stabilisation loop and why not a PLL one, just as previously suggested i figure! Etc., etc...

    Suffice to say there's a lot more stuff which occured past the popular Mazzilli module, since over a decade ago.

    Good day, have fun!!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Electronics Lab - High Voltage-Current Half Bridge Driver Using IR2153 & IGBT [800x360] .PNG 
Views:	30 
Size:	82.6 KB 
ID:	61011   Click image for larger version. 

Name:	Elettro Amici - iR2153 Schema 2 [800x546] .PNG 
Views:	28 
Size:	153.5 KB 
ID:	61012  
    http://www.jango.com/profiles/44436821

  4. #4
    Seedling Egzoset's Avatar

    Join Date
    Jun 2012
    Location
    Qc, Canada
    Posts
    146
    Thumbs Up/Down
    Received: 3/0
    Given: 7/0
    Rep Power
    9

    0 Not allowed! Not allowed!

    Lightbulb

    Getting closer...






    Either one wants to risk verify that the Mazzilli topology will end up destroying its power stage (unless it's corrected, if possible...), eventually, either one drops it altogether after paying due attention to "feedback interlock" problem(s) reported by multiple sources. For example:


    [ https:// forum.allaboutcircuits.com/threads/induction-heater-by-mosfet-irfn-260.163638/page-2#post-1440650]
    Induction heater by MOSFET IRFN 260 (2019-Oct-6)


    [ https:// docplayer.net/26964431-High-voltage-resonant-self-tracking-current-fed-converter-a-thesis-presented-to-the-faculty-of-california-polytechnic-state-university.html]




    High voltage resonant self-tracking current-fed converter (2010-Mar), p52/152...


    Briefly put just get rid of Mazzilli's cross-connected diodes and consider preparing to adopt dedicated Gate Drivers instead:





    Better yet, pave the way to a PLL setup by separating the opto-couplers so these simultaneously provide "Interlock" safety on top of phase/frequency signaling, either for a 4046 or perhaps even synthetic (Linux) Software Defined Radio... In any case i'm done dealing with ghosts in a machine!

    Good day, have fun!!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Interlock Safety idea for Mazzilli ZVS by Egzoset (2020-Jul-24) [640x400] .PNG 
Views:	25 
Size:	93.7 KB 
ID:	61013   Click image for larger version. 

Name:	Interlock Safety WITHOUT Mazzilli ZVS - by Egzoset (2020-Jul-24) [640x400] .PNG 
Views:	22 
Size:	105.9 KB 
ID:	61014  
    http://www.jango.com/profiles/44436821

  5. #5
    Seedling Egzoset's Avatar

    Join Date
    Jun 2012
    Location
    Qc, Canada
    Posts
    146
    Thumbs Up/Down
    Received: 3/0
    Given: 7/0
    Rep Power
    9

    0 Not allowed! Not allowed!

    Cool

    Time for an update!



    Hear the news!! Or at least what i learned yesterday and that sure ain't coming to my attention as soon as i'd have wished, nor expected:

    Lots of stuff from the Tesla Coil guys (& friends) started to arrive via Asia, but not only!

    Please check more closely this other fine item actually conceived & produced in the United Kingdom:


    And in that case that's not even a 1st version, shown below:



    { External power "choke" (toroïd) and "tank" capacitors not included. }

    ...

    Well, it may come late but here's finally my teaser reporting it anyway:

    It's real small (5 cm x 5 cm), so tiny it might even fit in my HerbalAire v2.1, though with some external PSU attached to be honest. Some mention is made about obtaining a ~240 W output using 24 Vdc @ 10 A, with maximums close to 20 A(cont.) or 70 A(peak), which implies the addition of a Heatsink, a cooling fan and/or even a water pump + radiator (for heavy-duty water-cooled workcoils!)... An optional potentiometer & push-button extension module is available, even an OLED display module, external sensors, etc. Thermostatic regulation is performed in 1 second cycles, with 4 levels to choose from: 25%, 50%, 75% and 100%. Access to frequency is provided besides automated management of Zero-Voltage Switching, Under-Voltage, Over-Voltage, Over-Vurrent, Over-Heating and also for being unable to "resonate" - plus error codes. Hence i can safely bet such module fairly implements TRUE "ZVS" as well, contrary to dirty-cheap Mazzilli-topology modules from Amazon/e-Bay, wherever.



    Now i know and so do you.



    Good day, have fun!!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	eBay dot Ca - A musical Tesla Coil (DRSSTC SSTC) from Asia [500x360] .PNG 
Views:	21 
Size:	318.9 KB 
ID:	61015   Click image for larger version. 

Name:	RMCybernetics - DiY Induction Heater - model CRO-SM1 of 2015 [280x360] .PNG 
Views:	21 
Size:	152.0 KB 
ID:	61016   Click image for larger version. 

Name:	RMCybernetics - DiY Mini Induction Heater - model CRO-SM2 [480x360] .PNG 
Views:	18 
Size:	302.0 KB 
ID:	61017  
    http://www.jango.com/profiles/44436821

  6. #6
    Data Nazi Lightly_Toasted's Avatar

    Join Date
    Dec 2010
    Posts
    3,677
    Thumbs Up/Down
    Received: 539/2
    Given: 348/1
    Rep Power
    15


    0 Not allowed! Not allowed!

    Default

    Awesome man! glad to see you still contributing!!!

    LT

  7. #7
    Seedling Egzoset's Avatar

    Join Date
    Jun 2012
    Location
    Qc, Canada
    Posts
    146
    Thumbs Up/Down
    Received: 3/0
    Given: 7/0
    Rep Power
    9

    0 Not allowed! Not allowed!

    Default

    Salutations Lightly Toasted,

    Quote Originally Posted by Lightly_Toasted View Post
    Awesome man! glad to see you still contributing!!!
    It sure was a pleasant surprise for me too and now i'm wondering if the community of IH vaporists shouldn't try to influence future revisions...

    What's particularily nice with such news is that we can expect alternatives promoting even more convenient "semi-DiY" experimentation, made fairly accessible to the masses or so, e.g. with most of the frustration from electronics tweaking already dealt with, at least in principle.

    Yet our needs can be very specific. For example, considering the announced topic i find my statement of July 8 has put emphasis on circuit disruptions (from parasitic RF "ringing" related to power device leads inductance combined to their associated internal gate capacitances) while actually there was an opportunity to highlight a potentially beneficial type of ringing as well: e.g. in my personal opinion, when "loaded" by a DynaVap VapCap, the field variations inside such LC resonator are going to reflect "sympathic" susceptor vibrations as this is mechanically linked to some bimetal type of "clicker" intended to signal completion of the pre-heating phase (once a designer-set temperature "ceiling" has been reached). Briefly put, just add a magnet to finally obtain one vague approximation of a dynamic transducer behaving both as a microphone and a speaker, or most likely a rudimentary version of it anyway! That means IH output level injection then can be controlled/metered auto-magically without even a display or a button to worry about besides the usual power switch, with all functions passing through DynaVap's hand-held delivery wand.



    At the moment i doubt RMCybernetics's CRO-SM2 mini "Induction Heater" can be programmed to "listen" at DynaVap's clicker-induced feedback signal but who knows what their next release will accomplish if only some relevant guidance could be provided to this company (and/or competitors) by daily IH dynavap tokers as ourselves - hence a need to spread the news.

    Good day, have fun!!
    http://www.jango.com/profiles/44436821

  8. #8
    Seedling Egzoset's Avatar

    Join Date
    Jun 2012
    Location
    Qc, Canada
    Posts
    146
    Thumbs Up/Down
    Received: 3/0
    Given: 7/0
    Rep Power
    9

    0 Not allowed! Not allowed!

    Default

    Some more details:




    Looking closer at it through my crystal ball i perceived 3 main features as most easily identifyable. Pointed by my green arrow the i2C bus supports an optional OLED display, in blue a pair of opto-couplers labelled as "A" and "B" implement galvanic isolation, while in purple this seems to be some brute-force/dummy dual Gates Driver probably WITHOUT interlock circuitry: e.g. protective functions actually appear to reside in the (lower-left) IC4 controller itself (using a feedback fraction of the loading signal present across the large "R010" resistor).

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	RMCybernetics CRO-SM2 - DiY Mini Induction Heater [640x480] .PNG 
Views:	14 
Size:	461.8 KB 
ID:	61018  
    http://www.jango.com/profiles/44436821

  9. #9
    Seedling Egzoset's Avatar

    Join Date
    Jun 2012
    Location
    Qc, Canada
    Posts
    146
    Thumbs Up/Down
    Received: 3/0
    Given: 7/0
    Rep Power
    9

    0 Not allowed! Not allowed!

    Lightbulb

    Fun game proposal!!




    { Scratch 'n Sniff! }

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Egzoset's Microphonics Experiment (2020-Sep-9) [400x300] .PNG 
Views:	6 
Size:	290.8 KB 
ID:	61019   Click image for larger version. 

Name:	Egzoset's Microphonics Experiment (2020-Sep-9) [480x360] .PNG 
Views:	2 
Size:	382.3 KB 
ID:	61020   Click image for larger version. 

Name:	Egzoset's Microphonics Experiment (2020-Sep-9) [400x300] .PNG 
Views:	9 
Size:	232.7 KB 
ID:	61021  
    http://www.jango.com/profiles/44436821

  10. #10
    Seedling Egzoset's Avatar

    Join Date
    Jun 2012
    Location
    Qc, Canada
    Posts
    146
    Thumbs Up/Down
    Received: 3/0
    Given: 7/0
    Rep Power
    9

    0 Not allowed! Not allowed!

    Default

    Announcement!



    Salutations,

    It's about the DynaTec (DynaVap) Orion:

    Quote Originally Posted by Egzoset View Post
    Better late than never, m'well it's only the begining of a prolific era anyway - this time a real/solid one i hope!



    Good day, have fun!!
    Last edited by Egzoset; 1 Week Ago at 02:18 PM.
    http://www.jango.com/profiles/44436821

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •